netYCE 7.0 demo & overview (latest) 

Overview netYCE platform + demo L2/L3 IPVPN provisioning use case on a Carrier Ethernet (Ciena/Cisco) network for a large Cable Service Provider.

Introduction netYCE platform 

Introduction video explaining the on the netYCE platform and how this can be used to automate and control network changes throughout multi vendor networks.

Demo netYCE (v6.1) 

10 minutes overview demonstration of the netYCE 6.1 release, with its main functions and capabilities.

Datasheet netYCE platform 

Datasheet netYCE platform

Customer case Rabobank 

Customer Case Rabobank

Executive briefing – 6 biggest risks facing business critical networks 

Executive briefing: The 6 biggest risks facing business critical IP networks.

Mastering the essentials of network automation 

Mini white paper describing the key essentials that need to be mastered for realising successful network automation.

Whitepaper netYCE platform 

Whitepaper netYCE platform

NetYCE awarded as Vendor to watch 2014 by analyst group EMA 

EMA "Vendors to Watch" are companies that deliver unique customer value by solving problems that had previously gone unaddressed or provide value in innovative ways. The designation rewards vendors that dare to go off the beaten path and have defined their own market niches.

NetYCE company profile by Heavy Reading 

NetYCE company profile written by Caroline Chappell, senior analyst from Heavy Reading.

Product brief netYCE by analyst group EMA 

Product brief netYCE by analyst group EMA, written by sr. analyst Jim Freij.

Press release – netYCE platform helps Rabobank migrate Cisco to HP 

Weesp, April 29th 2014 - Rabobank has started migrating their Cisco network equipment at the local banks to HP switches. In total there are about 570 locations and 1,500 network routers and switches. This operation can be realised much faster than usual because all configurations are prepared in an intelligent way with the netYCE automation platform.

The netYCE software enables Rabobank to stage all new equipment with configurations that are created and managed centrally in the platform. In this way Rabobank can replace the equipment in a matter of months, which is considerably faster than usual for a migration of this kind. On the evening before each migration, the switch will be activated by the netYCE software. If the engineer has actually replaced the hardware it will automatically get the right configuration from netYCE. Each week 25 sites are migrated in this way.

Another advantage is that considerably less time is spent in case a device is broken. The engineer has sufficient spares with him and does not need to program the device on the spot; this is done automatically by netYCE. The software also provides automated updates and registration of the hardware in the monitoring software. Rabobank uses netYCE already for more than ten years as their central network provisioning and automation tool. More information can be found in the Rabobank Customer Case.

Press release: Sigma Systems and NetYCE bring Idea-to-Install to Software Defined Networks 

Technology agreement gives communications service providers more control of new product launches across multiple domains and multi vendor networks

TORONTO – March 31, 2014 —Sigma Systems, the leader in catalog-driven Idea-to-Install products, today announced it has signed a technology agreement with NetYCE that will accelerate new service fulfilment for complex business data services including Carrier Ethernet, Metro Ethernet and layer 2/3 VPN business connectivity. The companies will work together to ensure seamless integration of the Sigma Idea-to-Install product portfolio and the NetYCE platform for Design Driven Networking.

NetYCE joins membership TM forum 

As of March 2014, NetYCE joined as member of the TM Forum. With its unique netYCE platform for network optimisation and automation, NetYCE will contribute to help companies streamline network engineering and operation processes, automate their existing infrastructures and assist in the transition to SDN and NFV networks.

Press release: NetYCE awarded as Vendor to watch 

Analyst group Enterprise Management Associates (EMA) has announced NetYCE as "Vendor to Watch 2014". EMA "Vendors to Watch" are companies that deliver unique customer value by solving problems that had previously gone unaddressed or provide value in innovative ways.

Interview NetYCE on SDN World Barcelona (May 2013) 

SDN and NFV seem to have suddenly become important - not just down in the engineering department but up at board level. That's a welcome change for Wim Gerrits, CEO and founder of Netherlands-based network automation specialist, NetYCE, who says successful SDN-driven network automation is only possible if led by a top-down design driven approach.

NetYCE signs European reseller agreement with Tucana Telecom NV/SA 

Press announcement European partnership between NetYCE and Tucana Telecom NV/SA (english version)

NetYCE signs partner agreement with Dimension Data 

Press announcement partnership between NetYCE and Dimension Data (dutch version)

Interview Wim Gerrits – Cloud Expo NY 

Wim Gerrits, Co-founder & CEO of NetYce, speaks with Cloud Expo Conference Chair Jeremy Geelan on SYS-CON.tv at Cloud Expo New York, held June 6-9, 2011 at the Jacob Javits

NetYCE at TM forum Live in Nice 2015 

NetYCE presents it's netYCE 7.0 release at the booth in Nice

Meet NetYCE at the TM Forum Live in Nice (June 2-5 2014) 

NetYCE will be at the TM Forum Live event in Nice. Please come by to visit us and send us and email at info@netyce.com

NFV SDN Summit 2014 

NetYCE will be exhibiting on the NFV-SDN world congress 2014. Please visit us on booth 305

MPLS SDN World congress 2014 

NetYCE will be exhibiting on the MPLS-SDN world congress 2014. Please visit us on booth 305

NetYCE presenting at the NLUUG (November 21, 2013) 

The NLUUG is the association of (professional) Open Systems and Open Standards users in the Netherlands (https://www.nluug.nl/index-en.html). Since the late seventies, the NLUUG has brought together the community of systems administrators, programmers, researchers and IP network professionals. The primary goal of the NLUUG is to extend the application of, and knowledge about, open systems and UNIX. NLUUG is focused on the Netherlands, which means that our communication is usually in Dutch. Conferences tend to have about half of the presentations in English. Click on the following links for more information:

NetYCE at the ONUG in New York (October 29-30, 2013) 

NetYCE will be at the Open Networking User Group on the 29th and 30th of October 2013 in New York. For people who are interested to meet up, please send an email to info@netyce.com. The Open Networking User Group is a community of IT business leaders who exchange ideas and best practices for implementing Open Networking and Software-Defined Networking (SDN) designs. ONUG events are for IT executives, global network architects, and designers to learn from peers and early adopters managing private or public clouds, enterprise data centers, WAN or service provider networks. http://opennetworkingusergroup.com/

SDN World event Barcelona (May 27-30, 2013) 

NetYCE participated on the SDN world event in Barcelona (27-30 May 2013) as presenter and during the panel discussion regarding the future of Software Defined Networking. http://sdnworldevent.com/exhibitor/netyce/

Broadband World Forum 2012 (October 16-18, 2012) 

NetYCE exhibited at the BBWF in 2012 at the RAI in Amsterdam.

NetYCE presenting at Network Automation event (Juni 19-21, 2012) 

CTO and founder of NetYCE presenting: "No Need to Run from Design Complexity" at the NWA event 2012 in Paris. Today's businesses are demanding network agility and availability, while lowering the TCO. By designing and deploying the network from a central repository, complexity can be made manageable allowing you to create networks without compromise. This also touches on the multi-vendor discussion.

NetYCE presenting at Network Automation event (November 8-10, 2011) 

Eric Yspeert, CTO & Co-founder, NETYCE, Presenting on NWA 2011 event 2011 Cloud Computing: A New Angle on Configuration Control The effects of the Cloud computing revolution have been unmistakable across all IT disciplines, and the network is no exception. Discussing the YCE Platform. Eliminating the availability and performance risks of unsanctioned changes being made to devices in the field. Providing a means to standardize configurations, and an assured means for enforcing governance policies that become increasingly essential to upper layers of IT and business management.